Controlling Power On/Off Automatically (Power Control Function)
Controlling Power On/Off
Automatically (Power
Control Function)
This monitor has two power controlling functions. You can set it to turn off the power automatically after a certain period if there is no input signal from the RGB1 or RGB2 connectors (POWER SAVING function). You can set the time when the power automatically turns on/off (ON/OFF TIMER function).
Power Saving Function
1 Press MENU.
The main menu appears on the monitor screen.
M A I N M E N U
P I C C O N T R O L
P I C S I Z E
C O N F I G
M E M O R Y
R E M O T E
S T A T U S
S E L E C T | S E T ENTER | E N D MENU |
3 Press M/m to move the cursor (B) to “POWER CONTROL” and press ENT.
The following menu appears on the monitor screen.
P O W E R C O N T R O L |
|
|
P O W E R S A V I N G | : | O F F |
O N / O F F T I M E R | : | O F F |
S E L E C T | S E T ENTER | E N D MENU |
4 Press M/m to move the cursor (B) to “POWER SAVING” and press ENT.
The following menu appears on the monitor screen.
P O W E R S A V I N G | : | O F F |
2 Press M/m to move the cursor (B) to “CONFIG” and press ENT.
The CONFIG menu appears on the monitor screen.
C O N F I G |
|
|
|
D I S P L A Y | : |
| O N |
C L O S E D C A P T I O N : |
| O F F | |
C O L O R S Y S T E M | : | A U T O | |
S C R E E N F I L L | : C E N T E R | ||
P O W E R C O N T R O L |
|
| |
S C R E E N S A V E R |
|
|
|
T I M E S E T |
|
|
|
L A N G U A G E |
|
|
|
S E L E C T | S E T ENTER | E N D MENU | |
|
|
|
|
5 Press M/m to select the length of the time until the change to power saving mode.
OFF: The power saving function does not work.
5min: Change to the power saving mode after five minutes if there is no input signal.
10min: Change to the power saving mode after 10 minutes if there is no input signal.
The power indicator flashes when the unit is in the power saving mode.
To cancel the power saving function
•Input the sync signal again.
•Press the 1 switch on the control panel or the POWER switch on the Remote Commander.
Signal specification for using the power saving function
RGB1: When the sync signal is connected to the HD/COMP IN connector.
RGB2: When the sync signal is connected to the 13th pin of the RGB IN
34 (GB)