Sony STATUS menu

STATUS menu

This menu is used for displaying the internal condition of the monitor.

e;	S T A T U S
	M O D E L N A M E	:	P F M - 5 1 0 A 2 W U
ea
	S E R I A L N o .	:	2 8 0 0 0 0 1
	O P E R A T I O N	:	0 0 0 0 0 1 H
es
	S O F T W A R E	:	Ver 1 . 0 0
ed	T E M P E R A T U R E	:	O K
	F A N	:	O K
ef
eg

e; MODEL NAME

Indicates the model name.

ea SERIAL No.

Indicates the serial number.

es OPERATION

Indicates the total operation hours.

Note

The standby mode is not counted as part of the OPERATION time.

ed SOFTWARE

Indicates the system software version.

ef TEMPERATURE

Indicates whether the internal temperature of the monitor is normal.

OK: Normal

NG: Unusual

When the internal temperature is unusual, NG is displayed and the item flashes in red. The 1 indicator on the control panel also flashes.

Note

The “TEMPERATURE NG” message may appear when the ventilation holes are blocked or the monitor is installed in a poorly ventilated area. In this case, check that the ventilation holes are not blocked and install the monitor in a well ventilated area. If the message is still displayed, contact your authorized Sony dealer.

When the 1 indicator flashes or NG is indicated, see “Self- diagnosis Function” on page 36 (GB).

Using On-screen Menus

eg FAN

The cooling fans are built into this monitor. This item indicates whether the cooling fans work properly.

OK: Normal

NG: Unusual

When the cooling fans are not working normally, NG is displayed and the item flashes in red. The 1 indicator on the control panel also flashes.

Note

When the “FAN NG” message appears, contact your authorized Sony dealer.

When the 1 indicator flashes or NG is indicated, see “Self- diagnosis Function” on page 36 (GB).

Cooling fans

Ventilation holes

Note

The upper cooling fans detect the monitor’s internal temperature and control the fan rotation. If the ambient temperature is high, the fan speed increases and the noise will be louder.

19 (GB)