Location and Function of Parts and Controls
Front / Sides
Front
1 2
Left side | Right side |
6
3
45
1Retractable feet
Use for setting the monitor on the floor.
For details on using the retractable feet, see “Using the Retractable Feet” on page 13 (GB).
2Control panel
For details on the control panel, see “Control Panel” on page 8 (GB).
3Left panel cover
Open this when using the left connector panel.
You can install the Remote Commander in a slot on the back of this cover.
For details on opening the panel cover, see the
4Left connector panel
For details on the left connector panel, see “Left Connector Panel” on page 10 (GB).
Location and Function of Parts and Controls
5Right connector panel
For details on the right connector panel, see “Right Connector Panel” on page 9 (GB).
6Right panel cover
Open this when using the right connector panel.
For details on opening the panel cover, see below.
To open the panel cover
Loosen the screws counterclockwise and open the cover.
To take off the panel cover
Loosen the screws as illustrated below and take off the panel cover.
Screws
To install the Remote Commander in the panel cover
Install the Remote Commander in the slot on the back of the left panel cover as illustrated below.
Remote
Commander
Note
When housing the Remote Commander, make sure that the top of the Remote Commander faces upward and the rear faces outside.
7 (GB)