Adjusting the Picture
(1)Select a number to register with M/m and press ENT.
The cursor (B) appears on the monitor screen.
(2)Press M/m to move the cursor (B) to the gain that you want to set.
The following menu appears on the monitor screen.
(7)Select a character in the character list with M/m and press ENT.
The selected character is input.
(8)Repeat steps (6) and (7) until you finish inputting the name, then press MENU. The menu returns to the COLOR TEMP menu.
C O L O R T E M P | : |
| 1 |
R E D G A I N |
| : | 2 5 5 |
(3)Adjust the gain (10 to 255) with M/m and press MENU.
The menu returns to the COLOR TEMP menu.
(4)Repeat steps (2) and (3) to set the other gains and press MENU.
The menu returns to the COLOR TEMP menu.
When you rename the adjusted color temperature, follow the steps below.
(5)Press M/m to move the cursor (B) to “NAME SET” and press ENT.
The following menu appears on the monitor screen.
C O L O R T E M P | : [ | 1 ] |
N A M E S E T : [ – ⋅ ⁄ =± 0 1 2 3 4 ]
S E L E C T | S E T ENTER | E N D MENU |
Character list
(6)Select the character to be changed with M/m and press ENT.
The background of one character in the character list changes to cyan.
SHARPNESS
Change the outline correction level in three levels (HIGH, MID or LOW).
1 Press M/m to move the cursor (B) to “SHARPNESS” and press ENT.
2 Select the outline correction level with M/m and press ENT.
HIGH: sharper picture
MID: standard value
LOW: softer picture
Notes
•CHROMA and PHASE controls do not function with an RGB signal.
•PHASE control does not function with a component signal.
•PHASE control does not function with a PAL or SECAM color source.
•Do not change the CHROMA/PHASE (NTSC only) level when the selected signal is
Restoring the PIC CONTROL Menu Items to Original Settings
1 In the PIC CONTROL menu, Press M/m to move the cursor (B) to “RESET” and press ENT.
The following menu appears on the monitor screen.
R E S E T | : | N O |
S E L E C T | S E T ENTER | E N D MENU |
24 (GB)