HELP15

Adhesive bond (B-10):

J-6082-612-A

Grease (G-35):

J-6082-621-A

Anti-diffusion agent (A-20): J-6082-611-A

1.Apply the anti-diffusion agent (A-20) to the indicated portions of cam tube.

2.Apply the grease (G-35) to the cam tube, cam groove and them contact zone.

3.Attach the float ring so that the groove of cam tube places the bosses of float ring.

4.Apply the grease (G-35) to the indicated portions of cam tube retainer.

5.After tightening the cam tube retainer, loosen it about 10 to 15mm from dead end, apply the adhesive bond (B-10) to indicated portion.

6.Comform the movement of the cam tube.

After confirming the movement, apply the adhesive bond (B-10) in width of 5 to 10mm to 2 locations.

Cam Tube Retainer

Apply the grease (G-35) to holding surface sides of cam tube retainer.

Cam Tube

Apply the anti-diffusion agent (A-20)

Apply the anti-diffusion agent (A-20)

Apply the grease (G-35)

(6 locations of cam groove)

Apply the anti-diffusion agent (A-20)

Groove

Fixed Tube

Apply the grease (G-35)

Boss of float ring

 

 

 

 

 

 

Cam Tube

 

 

 

 

 

 

 

 

 

 

Cam Tube

Apply the grease (G-35)

Apply the grease

Cam Tube Retainer

(G-35)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fixed Tube

Apply the adhesive bond (B-10)

 

(circumference of 2 locations,

 

width of 5 to 10mm)

Apply the grease (G-35)

(6 locations of cam groove)

Distance Control Tube

SAL35F14G (1.4/35G) (35mm F1.4G)

HELP

Page 25
Image 25
Sony SAL35F14G service manual HELP15