Sony SAL35F14G service manual Focus Brush Position Check Focus Adjustment Point

4-7-2. Focus Brush Position Check (Focus Adjustment Point)

Equipment

•Personal Computer

•Finished Inspection JIG

•Lens Adjustment Program (ActuatorChecker.exe)

1. Preparations

1)Connected to equipment with checking lens. (Refer to Section 4-1-3.)

2)Start up of “ActuatorChecker.exe”.

3)Click [Set up], and perform the initial setting. (Refer to Section 4-1-4.)

2. Checking Method

1)Click the [Focus Adjustment Point].

Fig.4-7-6

2)The Serial window appears. Input the lens serial number.

Note: When [OK] is clicked without inputting the serial number, the date executed is displayed on the completion window of each item.

Fig.4-7-7

3)The message “Move FOCUS to Near position. Then push [ENTER].” is displayed on the pop-up window. Set the focus to the near position and press down the ENTER key.

Fig.4-7-8

SAL35F14G (1.4/35G) (35mm F1.4G)

4-29