Sony SAL35F14G service manual HELP04, HELP05

HELP04

Adhesive bond (B-40): J-6082-614-A

Apply the adhesive bond (B-40) to 5 screws shown in figure and tighten the screws.

Apply the adhesive bond (B-40)

Apply the adhesive bond (B-40)

Apply the adhesive bond (B-40)

Light Interception Tube

HELP05

Adhesive bond (LOCTITE 460) (Note)

Note: Use adhesive bond (LOCTITE 460) or an equivalent article.

Do not use what becomes white after drying like quick-drying glue.

Anti-diffusion agent (A-20):	J-6082-611-A
Grease (G-85):	J-6082-626-A

1.Apply the anti-diffusion agent (A-20) to the indicated portions of lens mount.

2.Apply the grease (G-85) to 3 locations of indicated portion3 (3 locations) of lens mount.

3.Apply the adhesive bond (LOCTITE 460) to the stopper screw and attach it to the lens mount.

Apply the adhesive bond (LOCTITE 460)

Apply the grease (G-85) to 3 locations of indicated portion.

Apply the anti-diffusion agent (A-20)

to all circumferences of indicated Portion.

Lens Mount

Apply the grease (G-85) (rear side)

SAL35F14G (1.4/35G) (35mm F1.4G)

HELP