Sony SAL35F14G Focus Hold Button Check Focus Hold Button, Click the Focus Hold Button

4-8. FOCUS HOLD BUTTON CHECK (FOCUS HOLD BUTTON)

Equipment

•Personal Computer

•Finished Inspection JIG

•Lens Adjustment Program (ActuatorChecker.exe)

1. Preparations

1)Connected to equipment with checking lens. (Refer to Section 4-1-3.)

2)Start up of “ActuatorChecker.exe”.

3)Click [Set up], and perform the initial setting. (Refer to Section 4-1-4.)

2. Checking Method

1)Click the [Focus Hold Button].

Fig.4-8-1

2)The Serial window appears. Input the lens serial number.

Note: When [OK] is clicked without inputting the serial number, the date executed is displayed on the completion window of each item.

Fig.4-8-2

3)The message “Push [FOCUS HOLD] button once softly.” is displayed on the pop-up window. Press the focus hold button.

Fig.4-8-3

4)When the focus hold button check finishes normally, “OK” is displayed on the pop-up window.

Fig.4-8-4

SAL35F14G (1.4/35G) (35mm F1.4G)

4-34