Sony SAL35F14G service manual Case of error display in the Focus Adjustment Point

4)When the Near position check finishes normally, the message “Move FOCUS to Infinity position. Then push [ENTER].” is displayed on the pop-up window.

Set the focus to the infinity position and press down the ENTER key.

Fig.4-7-9

5)When the infinity position check finishes normally, “OK” is displayed on the pop-up window, and press the ENTER key to return to the initial window.

Fig.4-7-10

3. In case of error display in the Focus Adjustment Point

1)When the error display and the NG display appear to the pop up window, press the ENTER key to return to the initial window, and perform “2. Checking Method”again.

• In case of error at the near position in the Focus Adjustment Point

Fig.4-7-11

Fig.4-7-12

•In case of error at the infinity position in the Focus Adjustment Point

Fig.4-7-13

Fig.4-7-14

2)Although the lens is positioned at the near position or the infinity position, if “NG” appears, confirm or perform the following.

•4-7-1. Focus Brush Position Check (Search Focus Adjustment Point)

•Cleaning of flexible pattern or the brush.

•Replaceing the brush.

3)Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.

SAL35F14G (1.4/35G) (35mm F1.4G)

4-30