Sony SAL35F14G service manual Projective Resolving Power Check

Ver 1.1 2007.02

4-3. PROJECTIVE RESOLVING POWER CHECK

Equipment

•Lens Test Projector and Variable Transformer (Output voltage: AC 100 V)

Note: Connect the variable transformer (Output voltage: AC 100 V) to the lens test projector.

•A-mount Attachment

•Screen (Art paper)

•Tape Measure

•Plane Mirror (For SLRs)

1. Preparations

Note: Check the projective resolving power of the checking lens at the following focal-length and distance.

Focal-length	Distance (m)
f (mm)
35	1.4

Table 4-3-1

1)Perform the following steps (1) to (3), and incorporate the internal lenses of the lens test projector according to the checking focal- length.

(1)Open the lid of the lens test projector.

(2)Pull up and turn the fixed levers on the right and left sides of the lens test projector.

(3)Remove or insert the lens.

Note: Be sure to have the right position and direction of the lens.

Incorporate of the lenses

according to the checking focal-length (f).

Fixed lever Lens

Heat-absorbing filter

Chart

Chart

Filament

Filament

f=18 to 35 mm f=100 to 200 mm

Fixed lever

Lid

Chart Chart

Filament

Filament

f=35 to 100 mm f=200 to 300 mm

Lens test projector

Fig.4-3-1

SAL35F14G (1.4/35G) (35mm F1.4G)

4-18