Sony snt-v manual Monitor Screen and Alarm Function Setup, Layout Settings, Application Settings

Monitor Screen and Alarm

Function Setup

The (Application Design) icon is used to configure the monitor screen display and to determine the operation of the video network station when an alarm event occurs. Clicking the “Application Design” icon displays the following screen.

Clicking the (Layout and Application Wizard) icon displays the “Layout and Application Wizard”. When the wizard is first run, a screen appears on which to select either [Layout] or [Application] settings. Select [Layout] to configure the monitor screen, or select [Application] to set alarm inputs and alarm event responses.

Layout Settings

Setting	Description
Which view do you	Select which image is to be initially
want to display as	displayed when the user accesses the
default when	monitor screen:
opening the Web	• Camera View
interface?
	Displays the video camera image
	• HSR View
	Displays the HSR-1/1P/2/2P image
What type of	Select the image size for the monitor
image do you want	screen from the following:
to show in Web	• Fullsize
pages?
	Display 352 ⋅	240 NTSC or 352 ⋅
	288 PAL
	• Hugesize
	Display 704 ⋅	480 NTSC or 704 ⋅
	576 PAL

Setting	Description
What format do	Select the images and layout to be
you want ALL in	displayed on the monitor in the ALL
camera view to be	mode from the following:
in?	• All cameras
	All video camera images are
	displayed.
	• Camera 1 and 2 horisontally aligned
	Images of the video cameras
	connected to VIDEO 1 and 2
	terminals are displayed side by side.
	• Camera 1 and 2 vertically aligned
	Images of the video cameras
	connected to VIDEO 1 and 2
	terminals are displayed one above
	the other.
Woud you like to	Select whether to display the Sony
display the Sony	logo at the top of the page: either [Yes]
logo?	(display) or [No] (no logo).
Please enter the	Enter an image display interval from 0
time for sequential	to 30 seconds for each of the four
switching:	video sources. Setting 0 for a video
	source causes it to not be displayed on
	sequential mode. Also, if a short
	interval is set, the image may not be
	displayed, depending on network
	conditions and processing speed of
	the computer.

Application Settings

Setting	Description
Alarm Buffer,	A pre-determined amount of memory
Overwrite	is used to store images before and
	after an alarm event. If the quantity of
	images exceeds the allotted amount,
	select whether to overwrite previously
	stored contents, oldest first. Select
	either [ON] (overwrite) or [OFF] (no
	overwrite).
Alarm Pop-Up	Select whether a pop-up window
Window	should appear when an alarm event
	occurs: either [Enable] (display pop-
	up) or [Disable] (no pop-up).
Switch image	Select whether to switch the display to
when Alarm is ON	the alarm-detecting camera when an
	alarm event occurs: either [Enable] or
	[Disable] switching.

13