Installation
Modem Setup
The 
(Modem) icon is displayed when [Modem] is selected for the serial port usage. When a modem is connected to the video network station, if the “Modem” icon does not appear next the “COM2” icon, refer to “Serial Port Settings” on page 18 to reset the serial port usage.
1 Click the “Modem” icon.
The “Modem Settings” page appears.
2 Set the necessary items. Settable items are shown in the table below.
Setting | Description |
Modem Type | Select the connected modem. If a |
| matching modem type cannot be |
| found, select [Generic]. |
|
|
Ignore Dial | Select [NO] to start connecting after |
Tone | detecting a dial tone, or select [YES] to |
| start connecting without a dial tone. |
|
|
Type | Select [Null] if the modem is connected |
| with a |
| [Autodetected Modem] otherwise. |
|
|
Baud Rate | Select the communication speed |
| between the serial port and modem. |
|
|
Dial Prefix | Select either [Tone Dialing (ATDT)] or |
| [Pulse Dialing (ATDP)] according to |
| the type of telephone circuit used for |
| the modem connection. |
|
|
Flow Control | Select [CTS/RTS] if flow control is |
| available, or [OFF] to disable flow |
| control. |
|
|
Init String | If [Modem Type] is set to [Generic |
| Modem], enter the required modem |
| initialization string. |
|
|
3 Click the “Save” icon to save your settings when finished.
ISP (Internet Service Provider) Setup
The 
(ISP) icon is displayed when [Modem] is selected for the serial port usage. The “ISP” icon is used to set up connection with an “ISP” (Internet Service Provider). If the “ISP” icon is not displayed, reset the serial port usage according to “Serial Port Settings” on page 18.
1 Click the “ISP” icon.
The “ISP Settings” page appears.
2 Set the necessary items. Settable items are shown in the table below.
Setting | Description |
Select ISP | Select the destination ISP. If a |
| matching ISP cannot be found, select |
| [Generic]. |
|
|
Phone | Enter the telephone number of the |
Number | connection destination. |
|
|
Alternative | Enter the alternate telephone number |
Number | to be used if connection cannot be |
| established with the above number. |
|
|
User Name | Enter the user name for ISP host login. |
|
|
Password | Enter the password. |
|
|
Connection | Select [Always Open] to allow |
| unlimited connection to the ISP. Select |
| [Close after] to limit the connection |
| time, and enter the time limit (in |
| seconds). To have the ISP connection |
| cut automatically after transferring |
| images, select [Optimized]. |
|
|
Redial | Enter the number of times to attempt |
Attempts | redialing when a connect attempt fails. |
|
|
Redial Interval | Enter the interval (in seconds) |
| between redial attempts. |
|
|
3 Click the “Save” icon to save your settings when finished.
22
