Sony snt-v manual Part Names and Functions Rear Panel, AC in 12 V Input Terminal, MAC Address

Part Names and Functions

Rear Panel

12

AC IN
(12V)	COM 1

~~ A3 C3 A4 C4 B A

1 2 3 4 5 6 7 8

+	– A1 C1 A2 C2 RELAY
6	7

34

	ETHERNET
COM 2	10 /100

1AC IN (12 V) Input Terminal

The supplied AC adapter connects here.

2COM 1 Terminal (9-Pin D-Sub)

The EVI-D30/D31/G20/G21 or HSR-1/1P/2/2P can be connected to here. The EVI-D30/D31/G20/G21 connects using VISCA cable, and the HSR-1/1P/2/2P connects with RS-232C cable.

3COM 2 Terminal (9-Pin D-Sub)

The EVI-D30/D31/G20/G21 or a modem can be connected to here. The EVI-D30/D31/G20/G21 connects using VISCA cable, and the modem connects with RS-232C cable.

4ETHERNET 10/100 Terminal (RJ-45) Using Category 5 twisted-pair cable, connect this terminal of the server to the network as a 10-Mbps Ethernet or 100-Mbps Fast Ethernet device.

5I/O Terminal Block Connector

This is an accessory input/output connector, used for alarm inputs. Refer to “Basic Specifications” on page 41 for details.

6MAC Address

The MAC address is shown on the label on the bottom.

6