Sony snt-v manual Operation Camera View Operations

Operation

Camera View Operations

The Camera View displays the video camera images. Use the screen buttons and icons to switch between cameras and display modes.

	qa	qs
1			qd
2
3
4
5				qf
6
7
8
9
0			qg

1[ALL] Button

Clicking this button switches the monitor screen to the ALL mode (as shown in the above example). In this mode, images from the video cameras connected to the video network station are displayed in two or four partitions.

2[CAM1] to [CAM4] Buttons

Clicking one of these buttons changes the monitor screen to the Single mode, in which only one video camera image is displayed. Each button corresponds to one of the video input terminals (“VIDEO 1” to “VIDEO 4”) on the video network station. Buttons corresponding to disabled video input terminals are not displayed.

3[SEQ] Button

Clicking this button changes the monitor screen to the Sequential mode, in which the image from each video camera is displayed one at a time, switching from one camera to the next at preset intervals.

4[ALARM] Button

Clicking this button changes the monitor screen to the Alarm mode, which allows searching images or replaying video when an alarm has occurred. Images saved using the Snapshot icon can be viewed in the Alarm mode. Refer to “Viewing Alarm Event Images” on page 29 for details.

5[ALARM MEMORY] Indicator

Images saved when an alarm event occurs or when the Snapshot icon is clicked are stored in memory in the video network station. The amount of available memory is indicated in seven steps from “E” (empty) to “F” (full).

6Users Logged On

Shows the number of users logged on to the video network station.

7[HOME] Button

Returns the video camera to the home position.

26