v
Index name of the component
v
Selected component
v
Sound field applied to the program source
When the tuner is selectedv
Index name of the preset station* or program
station name** v Frequency
v Program type indication**
v Radio text**
v Current time
v
Sound field applied to the band or the preset
station
*Index name appears only when you have assigned one to the component or preset station (see page 49). Index name does not appear when only blank spaces have been entered, or it is the same as the function button.
**These indications appear only during RDS reception (see page 45).
!¡ Use the SOUND FIELD buttons to enjoy surround sound. For details, see “Enjoying Surround Sound” starting from page 29.
A.F.D. button / indicatorPress to set the receiver to automatically detect the type of audio signal being input and perform proper decoding (if necessary).
MODE button / indicatorPress to activate the sound field selection mode (page 30).•Sound fields are not compatible with 96 kHz digital audio signals.
This indicator lights when the unit is decoding signals recorded in a multi channel format.
!£ BASS BOOST buttonPress to increase the bass of the front speakers. The BASS BOOST indicator lights up when the function is turned on.
•The bass booster is not compatible with 96 kHz digital audio signals.
•The bass boost does not work with the HEADPHONE THEATER sound field or when 5.1CH INPUT is selected.
!¢ EQUALIZER buttonPress to turn the equalizer on or off. “EQ” appears in the display when the equalizer is turned on.
When you adjust the equalizer using the EQ parameters (page 38) the settings are stored automatically and can be reproduced whenever you turn on the equalizer.
•The equalizer is not compatible with 96 kHz digital audio signals.
•The equalizer does not work with the HEADPHONE THEATER sound field or when 5.1CH INPUT is selected.
zWhen you want to listen to an analog source without any digital processingDo the following to bypass the sound field, equalization, and bass booster circuits.
1 Press BASS BOOST to turn off the BASS BOOST indicator. 2 Press EQUALIZER to turn off the EQUALIZER indicator. 3 Press 2CH.
The result will be a sound that is highly faithful to the program source.
! The following buttons operate the
Press to scan stations by program type. The PTY button does not function during AM reception.
EON buttonPress to set the receiver to automatically switch to stations broadcasting traffic announcements, news, or information program. The EON button does not function during AM reception.