Operations Other
You can record from a VCR, a TV, or an LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See your VCR or LD player’s instruction manual if you need help.
1Select the program source to be recorded.2Prepare the component for playing.
For example, insert the laser disc you want to record into the LD player.3Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording.4Start recording on the recording VCR, then start playing the video tape or laser disc you want to record.
zYou can record the sound from any audio source onto a video tape while copying from a video tape or laser disc
Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium.
To resume audio recording from the original medium, select the video source again.
Note
Please be sure to make both digital and analog connections to the TV/LD and DVD inputs. Analog recording is not possible if you only make digital connections.
Adjustments Using the SET UP Button
The SET UP button allows you to make the following adjustments.Adjusting the CONTROL A1 autofunctionTurning on the CONTROL A1 auto function parameter lets you turn Sony components connected via CONTROL A1 cords (see page 13) on automatically when you press the corresponding function button.
Auto function is set to ON by default.1Press SET UP.2 Press the cursor buttons ( or ) to select “AUTO FUNCTION.”3Turn the jog dial to select “ON” or “OFF.”