Inserting a Memory Card
The memory card reader(s) are located behind a protective cover on the front of the computer. To access the Memory Card Readers, flip the front cover down.
To insert Memory Cards
1From the front panel, locate the appropriate reader(s) for the memory card(s) you want to use.
2Insert the memory card into the reader, in the direction indicated of the arrow on the media. Do not force the card into the reader
Note: If the memory card does not go in easily, gently remove the card and verify you are entering the card in the proper direction.
To Protect data on Memory Stick® Media
Some Memory Stick® media are equipped with a
Locking the Memory Stick®
If your computer stops recognizing your Memory Stick® media, you may have removed the media from the Memory Stick drive before the data access process completed. If this occurs, follow these steps:
1Remove the Memory Stick® media from the slot.
2Shut down your computer, closing any open software programs, and then turn your computer off.
3Wait approximately 30 seconds, and then restart your computer.
Your computer recognizes the Memory Stick® media, when you insert it into the Memory Stick slot again.
Removing a Memory Card
The correct way to remove a memory card from a memory card reader varies, depending upon the media, reader, or computer model. Use care when removing a memory card to avoid damage to the reader or card.
Note: Do not remove a media card while the media access indicator light is on. The card or its data may be damaged.
13 |
