Preparation

●Use Type I (normal) tapes only.

●Set the tape to the point where recording will start.

●Note that recording is done on only one side of the tape.

1Insert the tape to be recorded on into Deck 1.

Insert the tape with the side to be recorded on first facing out from the unit.

,/=

2 Press one of the function buttons and prepare the source to be recorded.

To record from a CD, press CD and load the disc(s).

To record from a taDe, press TAPE. Then, insert the original tape into Deck 2 and play it.

To record from a radio broadcast, press TUNER/BAND and tune in to a station.

To record from a connected source, press PHONO or VIDEO/AUX and play.

3 Press . on Deck 1 to start recording.

b is depressed simultaneously.

When the selected function is CD, playback and recording start simultaneously.

la

To stop recording, press W= on Deck 1.

To pause recording, press II on Deck 1.

To resume recording, press it again.

To record selected tracks of the CD

Before pressing ● , program the tracks (Page 14).

To record part of the CD

When ● is pressed, recording always starts

from the first track.

‘,:’:

To start in the middle of a track, play the CD first and press II

SET

‘$.

for CD at the point you wish to start recording from. Then, press

%&

● .The pause mode for CD button is released automatically

and

‘~,

recording starts.

 

 

&

 

 

 

 

 

 

Q

Sound adjustment during recording

 

 

 

The output volume and tone of the speakers

or headphones

are

@

freely varied without affecting the recording.

 

 

,g:,

nEEEl

M

:;;#

● Do not press the buttons on Deck 2 during recording.

 

“.cannot be depressed if the erasure prevention tab on the ~~’ side of the tape to be recorded is broken off.

To erase a recording

A previous recording is erased when a new recording is made on that part of that tape.

1Insert the tape you want to erase into Deck 1.

2Press TAPE and stop all the tape operation in Deck 2.

3Wind LIDthe ta~e to the ~oint where the erasure is to be started.

4Press b on beck 1 to ‘start the erasure.

About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A

To record on the tape again, cover the tab openings with adhesive tape, etc.

●120.minute or longer tapes are extremely thin and easily

deformed or damaged. They are not recommended.

c Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

ENGLISH 15