8;10u

In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.

1 Insert the tape into Deck 1.

Insert the tape with the side to be recorded on first facing out from the unit, and wind up the tape with +.

2 Press CD and load the disc(s).

3 Press CD EDIT/CHECK twice while pressing SHIFT on the remote control.

“EDIT”and “PRGM”are displayed.

PRGMEDIT

●When “Al” is displayed, press CD EDIT/CHECK while pressing SHIFT again.

4 Press numbered buttons on the remote control to designate the tape length.

10 to 99 minutes can be specified.

.44,

*

or MULTI JOG

are also available to designate

the tape

length.

Tape side A (front side)

 

Tape length

Maximum recording time for side A

5 Press one of DISC DIRECT PLAY 1-5 to select a disc.

Then, press numbered buttons O-9 and +10 on the remote control to program a track.

To select disc 4 or 5 from the remote control, press DISC DIRECT PLAY 4 or 5 while pressing SHIFT.

Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and O.

 

Remaining

Programmed

Selected track number

time on side A

track numbers

Prog;am number

6Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed.

7Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side B and program the tracks for side B.

Tape side B (reverse side)

8Press CD EDIT/CHECK while pressing SHIFT to select side A and press . on Deck 1.

~flashes for 10 seconds, and then CD play and recording of edited tracks for the first side start simultaneously. When the end of the tape is reached, Deck 1 enters the recording stop mode. After entering the recording stop mode, go to step 9.

9Press CD EDIT/CHECK while pressing SHIFT on the remote control for recording of the second side.

“B is displayed.

10 Turn over the tape in Deck 1 and press@ to start recording.

Recording starts.

To stop recording

Press ■/= on Deck 1. Recording and CD play stop simultaneously.

To check the order of the programmed track numbers Before recording, press CD EDIT/CHECK while pressing SHIFT

on the remote control to select side A or B, and press - or

-repeatedly.

Track number Programmed track numbers

Disc number Program number

To change the program of each side

Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press ■ CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice in stop mode so that “EDIT”disappears on the display.

●Recording is inhibited if the erasure prevention tab for the side of the tape facing out from the unit is broken off.

●Up to 30 tracks can be programmed from any of the inserted discs.

c “FULL”is displayed if you attempt to programme more than 30 tracks.

ENCWSH 17