16 Section 2A: Installing the Sprint Mobile Broadband Express Card
Getting Started
Before you can use your Sprint Mobile Broadband Express Card,
you must:
1. Install the Sprint Connection Manager Software, located
on the installation CD, onto your computer.
2. Insert the card into your computer’s Express Card slot.
Windows will detect the card and automatically install
the necessary device drivers.
3. Launch the Sprint Connection Manager Software
application.
4. Activate your Sprint Mobile Broadband Express Card
and Sprint account, unless the card was preactivated. If
your card has not previously been activated, the
Activation Wizard will automatically launch and guide
you through the process.
Note: Before installing your new software, delete or uninstall any
previously existing modem or dialer software from your
system.
Do not insert the card into your computer’s Express Card slot
until you have installed the Sprint Connection Manager
Software onto your computer or until instructed to do so by
the installation CD.
Note: A driver is software that forms the interface between a device
(such as the Sprint Mobile Broadband Express Card) and the
operating system on your computer.