Dialing From the Contacts List

TodialdirectlyfromaContactsentry:

1.Select >Contacts>Find/AddEntry.

Shortcut:

From the standby mode, select Contacts (right softkey) to display the Contacts list.

2.Highlight the entry you want to call and press to dial the entry’s default phone number.

– or –

To dial another number from the entry, highlight the name and press , and then highlight the number you wish to call and press .

Using Speed Dialing

With this feature, you can dial your favorite entries using one keypress for locations 2–9. (See “Assigning Speed Dial Numbers”on page 101.)

Tousespeeddial:

From standby mode, press and hold the appropriate key for approximately two seconds. The display confirms that the number has been dialed when it shows “Connecting...”.

Note:

Speed dialing may notbe available when you are roaming; when you are roaming off the Sprint National Network, you mustalways dial using 11 digits (1 + area code + number).

38 Section 2A: Phone Basics

Page 54
Image 54
Sprint Nextel Katana 2, Katana II Dialing From the Contacts List, Using Speed Dialing, TodialdirectlyfromaContactsentry