TurningYour Phone On and Off
TurningYourPhoneOn
Toturnyourphoneon:
▶Press 
END .
Once your phone is on, it may display “Looking for service...,” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for Sprint service by pressing any key (when your phone is turned on).
Tip: | The Power Savefeaturehelps to conserve your battery power |
| when you arein an area where thereis no signal. |
|
|
TurningYourPhoneOff
Toturnyourphoneoff: |
|
▶ Press and hold END | for two seconds until you see the |
powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is charging).
PhoneBasics
Section 2A: Phone Basics | 19 |
