Receiving a SprintPCS Ready Link Call
ToreceiveaSprintPCSReadyLinkcall:
1.Make sure your phone’s Sprint PCS Ready Link mode is enabled. (See “Setting Sprint PCS Ready Link Mode”on page 138.)
2.When you receive a Sprint PCS Ready Link call from a contact,
■When you receive a group call, “Group Call,”the group member’s name, and the Sprint PCS Ready Link number appear.
■If nobody takes the floor for 20 seconds, the call will be a missed Ready Link call.
3.If the person placing the call has kept the floor (held the Ready Link/Memo button), you will see the contact name and Sprint PCS Ready Link number along with “has floor,”and you will hear the caller speaking.
4.When the caller finishes speaking and releases 
, you will see “Floor is open.”on the display screen. Press
and hold 
to take the floor and reply to the caller. (You will see “You have floor.”and hear a tone confirming that you may speak.)
5.When the call is finished, press 
.
Tip: You can also receive a SprintPCS Ready Link call with the flip closed.
Press and hold 
to take the floor when the floor is open.
Note: You can change the volume and the speaker setting while a
SprintPCS Ready Link call is activated. Volume: Adjustthe voice volume by
using 
or by pressing the navigation key up or down exceptwhen you
are pressing and holding 
. Speaker: Switch the speaker on or off by
pressing 
.
