Star Micronics NX-I 00011 manual NLQ character, 128

t

By moving the cursor and pressing the Fl, F2, and F3 keys you can quicklybuild up the dot pattern. If necessaryyou can clear alldots by pressing F4 and start over. When the character is complete, press Return to store the dot data in the computer’smemory. The program willclear the character box and ask you to select the next character to design.

When you have finished designing characters, press the F6 key. The program will ask you whether you want to save, download, ad print the characters you have designed.If you answer Yes to all three questions,your characters will be saved on a disk file and downloaded to the printer, and the entire character set from character 33 (!) to character 126 (*) will be printed out.

At any point while you are selecting or designing characters you can press F5 to skip the current character and proceed to the next character.

The program does not allow you to redefine the space character, or to define any other character as an all-blank character. Nor can you assign character codes less than 33 or greater than 126to the characters you define.

NLQ character

I		First		ml...									...m23
		nas~		m24...									...m46 pass
		r-----
r		128												,28	ASCII Code	33
		64												64	Descender	I
.															Left space:	o
															Right spece:	93
		32														0
,,,16 I						I	O	0	70	36	22	6	6	6
		16												32	mO= Descender x 128
	,													16	+ (Left x 16) + Right
			8											8
			4
,—.														4
I			2											2
			1
		Dot data												1
	—Ist: 14 36 m 70 r26 o 0 0										9	9	8	0
	-2nd: Z?3 14 M						14 24	0	64 32 16 0				0	0
				32	64	0	0	0	12	12	14	14	14	12
-fgure C-2.Car aymbol, near letter quality

1,*-