Star Micronics NX-I 00011 Enable printing of all character codes, Enable printing of all character codes on next character, 65, Select s/ash zero, Select normal zero

i-
k
r
The first eight of these character sets (from U.S.A. to Spain I) can be
selectedas power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of all character codes
Mode ASCII Decimal IHexadecimal
IBM <ESC>“\” nl n2 27 92 nl n2 IB SC nl n2
Enablesprinting of all characters in the IBM character set, includingthose
assignedto character codes which are normallyconsidered control codes.
This command remains in effect for the next nl +n2x256 characters,
where nl and n2are numbers between Oand 255. During this interval
no control functions are executed. If acode with no assignedcharacter
is received,the printer prints aspace.
Enable printing of all character codes on next character
Mode ASCII Decimal Hexadecimal
IBMI<~~~ >“.3, I27 94 IIB 5E I
Thiscommand operates like <ESC >“\” except that it remains in effect
for onlyone character.
Select s/ash zero
Mode ASCII Decimal Hexadecimal
<ESC >“-” “1”
Both 27 126 49 IB 7E 31
<ESC>“-” <1> 27126 1 IB 7E 01
Causes subsequentzero characters to be overprinted with aslash (0).
Select normal zero
Mode ASCII Decimal Hexadecimal
<ESC >0
“-” ““ 27126 48 IB 7E 30
Both <ES(7>“w” <o> 27 126 0 IB 7E 00
II—-- ,!
Causes subsequent zero characters to be printed normally (0), without
aslash.
65