Line feed
Mode ASCII IDecimal Hexadecimal
Both <LF>]10 OA
Prints the current lineand feeds the paper to the next line. If DIP switch
1-2is ON, also moves the next print position to the left margin. See the
precedingcommands for the line spacing.
Reverse line feed
Mode ASCII Decimal Hexadecimal
Both <ESC ><LF>27 10 IB OA
Prints the current lineand feeds the paper in the reverse direction to the
precedingline. If DIP switch 1-2is ON, also moves thenext print position
to the left margin. See the preceding commands for the line spacing.
Ignored whenfriction feed is used.
Perform one n/216-inch line feed
Iklodel ASCII IDecimal IHexadecimal I
Both <ESC>“J” ~27 7’4 nIB 4A n
Feeds the paper once by n/216inches, where nis between 1and 255.
Does not move the print position right or left when DIP switch 1-2is
OFF. Does not change the line-spacingsetting. Ignored when friction
feedis used.
Perform one n/276-inch reverse line feed
Mode ASCII IDecimal IHexadecimal
BothI<ESC>“i” nI27 106 nIIB 6A n
—
—
—
—
—
Feeds the paper once by n/216 inches in the reverse direction, where n
isbetween 1and 255. Does not movethe print position right or left when
DIP switch1-2is OFF. Does not change the line-spacing setting. Ignored
whenfriction feed is used. —
Feed paper n/ines
Mode ASCII Decimal Hexadecimal
<ESC >“f’ “l” n27 102 49 n
Both IB 66 31 n
<ESC>“F’ <1> n27102 1nIB 66 01 n
Feeds the paper nlinesfrom the current line, where nis between Oand
127. —
IL
—
—