44
Appendix A
Find and record your computer’s IP configuration settings
Note: The following instructions are valid for Windows 95/98/Me/2000/XP only. If you are using a different OS, consult your OS manufacturer for details. If after completing this procedure you are still unsure of where to find some of the required information, contact your ISP for details.
1.Click on Start then Run.
2.Type “cmd” (or “command”) in the field and click OK.
3.At the command prompt, type “ipconfig /all” and press Enter. You should see a screen with information similar to the following:
You should record the following information prior to connecting the router:
Host Name (if any):
MAC/Physical Address:
IP Address:
Subnet Mask:
