6.Repeat step #19 four more times, each time entering the new weight from the scale into the controller using the arrow keys. Sometimes the values won’t change, or sometimes they may only change by a few tenths of a gram. The controller keeps a running average of all calibration weights entered.
7.After all five samples have been completed; press “calibration” once more and this will save the calibration weight of the material to the recipe. The calibration light will go out and the screen will now show the total amount of additive dosed. The Digital Dosing feeder is now ready to begin operation.
8.Please refer to “Operation Manual” for all supplementary information regarding general operation, cleaning/maintenance, and troubleshooting.
9.Make sure that there is a virgin material supply setup to begin processing. If you do not have a loader or hopper for the virgin material, or if any of the above procedures did not work properly, please contact the manufacturer in Wood Dale, IL for sales and technical support @ (800)
Digital Dosing Units | 10 |
