•Press 
once.
•The 
symbol will flash.
•After “1” flashes on the screen, a number in the format xxx.xx will come up on the display.
•Enter the additive percentage by using the Arrow Keys 
. The range of values that can be entered is 0.01 to 50.00%. The arrow keys are used to change all process variables. The double arrow key allows the user to ramp up or down at a faster rate.
Step 2:
or
•Press 
again.
•The symbols “g,” or “lb”, “min”, and 
flash.
•After “2” flashes quickly on the display, a number in the format xxx.xx will come up on the display.
•Enter the total extruder throughput in grams per minute or pounds per minute. The range of values that can be entered is 001.0 to 6500 grams per minute (00.01 to 14.30 lb/m).
Step 3:
or
Digital Dosing Units | 20 |
