Step 2:
or
•Press 
again.
•The machine displays a flashing “g” or “lb”, a flashing “min” and 
.
•After “2” flashes quickly on the display, a number in the format xxx.xx will come up on the display.
•Enter the expected extruder throughput during production in grams per minute or pounds per minute. The range of values that can be entered is 001.0 to 6500 grams per minute (00.01 to 14.30 lb/m).
Step 3:
•Press 
a third time.
• The machine displays a flashing screw | . |
•After “3” flashes quickly on the display, a number in the format xxx.xx will come up on the display.
•Enter the extruder screw speed (rpm) corresponding to the throughput entered in step 2.
Digital Dosing Units | 24 |
