1.Touch Menu. The “Menu” screen appears.
2.Touch Help. The “Help Menu” screen appears.
3.Touch Pump States. The “Pump Symbols Help” screen appears, explaining the status represented by each color.
4.When you are finished reviewing the information, touch Return. The “Help Menu” appears.
5.Touch Menu to return to the “Menu” screen.
The following table explains the status represented by each color at the Station Status screen.
Color | Label | Description |
Gray outline | Offline | Pump is not enabled. The controller ignores any alarms. |
Yellow | Ready | Pump is off, waiting for demand from a station. |
Blue | Idle | Pump is on, waiting for demand from a station. If there is no |
|
| demand before the end of the auto shutdown delay, the pump |
|
| will turn off. |
Green | Loading | Pump is conveying material to a station. |
Blue, blinking | Blow Back | Pump’s air filter is being cleaned by blowing compressed air |
|
| backward through it. |
Red, blinking | Alarm | Pump is in alarm. |
Red outline, blinking | Critical | Pump is in critical alarm. The controller has disabled the pump |
|
| until the alarm is cleared. |
Additional basic information about each pump, including configuration settings and the number of hours the pump has been running, is available at the “Pump Setup” screen. For details on configuration settings, see page 422. For details on the hour meter, see page 33.
Logging On and Logging Off
Your controller may be set up to require a password for any operation (other than reviewing station and pump status, silencing alarms, reviewing the alarm log, and looking at help screens). If so, touching a button will open the “Password Entry” keypad screen.
Figure 15: “Password Entry” Screen
Operation | 29 of 51 |
