Transfer To Standby Pump Screen | Sterling Plumbing scc2 manual

Figure 18: “Transfer To Standby Pump” Screen

6.Touch Source Pump. The keypad pops up.

7.Enter the number of the failed pump. Use (Backspace Key) to erase any

mistakes. Use (Enter Key) to enter the value. The number appears under Source Pump.

8.Touch Standby Pump. The keypad pops up.

9.Enter the number of the standby pump. Use (Backspace Key) to erase any

mistakes. Use (Enter Key) to enter the value. The number appears under

Standby Pump, and a button labeled Transfer to Standby Pump appears on the screen.

Figure 19: Transfer To Standby Pump Button

Note: When you enter the second pump number, the controller checks to make sure that both pumps are offline and that the standby pump has no stations assigned to it.

2–Pump 20-Station Controllers

Operation

35 of 51

Image 40

Sterling Plumbing scc2 specifications Transfer To Standby Pump Screen

Contents

SCC 2-Pump 20-Station Controllers Parts and Service Department Shipping Information Warranty Returns Credit Returns Table of Contents Safety Restoring a LOST/CORRUPT PROGRAM...380 How to Use This Manual SafetySafety Symbols Used in this Manual Controller Safety Tags Wear Safety Glasses and Work Gloves Safety Devices and Interlocks Safety Circuit StandardsSafety Device Lock-Outs Fail Safe Operation General Responsibility ResponsibilityOperator Responsibility Maintenance Responsibility Reporting a Safety Defect Standard Features Functional DescriptionModels Covered in This Manual General Description Optional Features Controller Features Uncrating InstallationMounting the Control Panel Pump 20 Station Controller with 6 Display Controller Identification Serial Number Tag Located on the side of the controller box Making Control Panel Power Drop Wiring Connections Connecting the Control Panel to Vacuum HoppersConnecting the Control Panel to the Pump Package Electrical Connections Setting the Number of Stations and the Number of Pumps Set-up Menu Screen Setting Up Alarm Duration System Setup Screen Setting Up Pump Staging Setting Up Touch Switch Delay Setting Up Stations Setting Up a Single Station Station Setup Screen Copying Settings from One Station to Others Station Copy Screen Setting Up Pumps Setting Up a Single Pump Pump Setup Screen Copying Settings from One Pump to the Other Pump Copy Screen Setup Password Finishing Setup Setting Up PasswordsOperator Password Page Initial Startup Operation OverviewBasic Tasks Reviewing Station Status Reviewing Pump Status Pump Status Screen During Operation Password Entry Screen Logging On and Logging Off Enabling and Disabling Stations and Pumps Reviewing and Adjusting Basic Station Settings Starting and Stopping the System Adjusting Convey Time and Dump Delay Navigating Among the Station Operator Screens Reviewing and Resetting a Pump Hour Meter Adjusting Advanced SettingsActivating and Stopping Priority Convey for a Station Transferring Stations to a Standby Pump Transfer To Standby Pump Screen Standby Pump Errors AlarmsReviewing Alarms Alarm Log Screen Silencing Alarms Restoring a Lost or Corrupt Program Corrective MaintenancePLC Memory Module Page Configurable Settings/Defaults Station Setup Factory Presets Pump 20-Station Controllers Configurable Settings/Defaults Pump Setup Factory Presets Idle Time Options Troubleshooting General Troubleshooting Pump Alarms Station AlarmsSystem Alarms Drawings and Diagrams WarrantyAppendix AC Voltage Spare Parts ListDC Voltage Service Department Technical Assistance Contact InformationParts Department Sales Department