Appliance Location | Stovax Studio 22 manual

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

5.APPLIANCE LOCATION

5.1Please note this appliance has been specifically designed for studwork applications although installation into other constructions, including masonry, is entirely feasible. There are two methods of installation, see Installation Instructions 3.2 Frame, 3.3 Edge

5.2This appliance must stand on a non-combustible hearth/ platform that is at least 12mm thick.

NOTE: It is recommended you construct the back panel of the fireplace from natural materials cut into three or more sections to prevent cracking. Resin-based materials may not be suitable. This appliance is an effective heat producer and attention must be paid to the construction and finish of the fireplace.

5.3A combustible shelf must be:

•maximum 150mm in depth

•minimum, 400mm high above the fire

A combustible side wall must be a minimum of 150mm from the appliance.

5

AR2077

15

Image 15

Stovax Studio 22 manual Appliance Location

Contents

Studio Studio 22 Balanced flue 8704BFLEC P8704BFLEC Covering the Following Model FLUE CHECK FailGAS CHECK General MAN ModeIncreasing Temperature Decreasing Temperature Setting the Time Temp ModeTimer Mode LOW Battery Cleaning the Studio Changing the Studio BatteriesAll models Arrangement of Fuel BED Advice on Handling and Disposal of Fire Ceramics Fire will not Light HOT SURFACES CAT Technical SpecificationCovering the Following Models Studio 22 BF 8704BFLEC P8704BFLEC Qty Description Fixing Kit containing Packing Checklist Steel Frame Dimensions Size mm Profil Frame Dimensions Size mmBauhaus Frame Dimensions Size mm Flue and Chimney Requirements SITE REQUIREMENTS TOP Flue UP & OUT KIT Flue OptionsRear Exit TOP Exits GAS Supply TOP Flue Vertical KIT 8524/8524ANTOP Flue Vertical Offset KIT 8530/8530AN Extra Flue Lengths Appliance Location Installation Safety PrecautionsInstallation of the appliance AR2117 Distance to Combustible Material Stud Work Installation Slips Flue system see Installation, Flue Assembly Apply a plaster finish to the chimney breast Studwork for Cool Wall Installation KIT Flue Assembly TOP Exit Vertical Including Offset Wall Thickness MINMAX TOP Exit Vertical & Horizontal Flue Add 10 mm to the outlet end Assembling the Appliance Arrangement of Fuel BED AR02123 Lighting the Studio Thermostatic Remote Control Commissioning Commissioning Check Servicing / Fault Finding ChartsSymptom Cause Remedy Servicing Requirements Flame Failure Functional Check Ignition Functional Check Decorative Frame Replacing PartsWindow Frame Assembly General MaIN Control Assembly Vermiculite PanelsMaIN Burner Pilot Unit Assembly Pilot Burner BracketElectrode Thermocouple Ignition LeadGAS Valve Pilot Injector Primary Aeration Plate Magnetic safety valveControl BOX Main injector Follow , Main Control Assembly Pressure and Leak Testing the Appliance Component Short Spares List Studio 7TH Service 1ST Service3RD Service 5TH Service Member of the Stovax Group