USER INSTRUCTIONS
7
AR1932
5. ARRANGEMENT OF FUEL BED
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect and side panels in this appliance are made from Refractory Ceramic Fibre (RCF), a material which is commonly used for this application.
Protective clothing is not required when handling these articles, but we recommend you follow normal hygiene rules of not smoking, eating or drinking in the work area and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a minimum, during installation and servicing a HEPA filtered vacuum is recommended to remove any dust accumulated in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the replaced items are not broken up, but are sealed within heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable,
Excessive exposure to these materials may cause temporary irritation to eyes, skin and respiratory tract; wash hands thoroughly after handling the material.
After cleaning the fire or replacing parts, carefully
ARE PLACED ON THE BURNER IT IS IMPORTANT THEY DO NOT COVER ANY PORTS!
The fuel bed is made up of embers and 6 logs, identifiable by moulded letters on their base:
5.1Place the embers around the burner holes as shown in Diagram 8. Do not cover any of the holes.
8
AR2120
5.2Place Log A onto the two studs on the burner skin,
Diagram 9, with charred effect of the log facing forward.
9
A
AR2121
5.3Place Log B on the ledge at the rear of the fire, Diagram
10.
10
B
A
AR2122
5.4Place Log C so that the back end sits in the groove in the rear of Log B and the front left rests in the
11
B
C
A
AR2123
5.5Position Log D so that the underneath rests in the groove of Log A, and the triangular groove in the base of Log D fits into the corner of the burner, Diagram 12.
7
