SERVICING INSTRUCTIONS
REPLACING PARTS
16.PRESSURE AND LEAK TESTING THE APPLIANCE
16.1Follow Section 7, Main Control Assembly:
• Access to the pressure test point can now be reached,
Diagram 19
19
AR2130
16.2To leak test any gas joints on the appliance, the control assembly must first be undone and tilted backwards, see Section 7, 7.3 Diagram 11
16.3Because there is now no burner fitted to perform a leak test, place a manometer tube over the injector tip.
•Light the appliance and spray any joints with leak detector fluid
•Tighten joints or replace as required
36
