Step IPartto remove I | Procedures |
~~~
RemarksTool
24Connecting rodand Piston
,,
i
(1)Remove connecting rodbolt after scraping
off carbonfrom cylinder andpiston.
M6 X 34mm flange bolt 2pcs. (EHI
(2)Remove connecting rod cap.
(3)Remove connecting rod from upper side of crankcase after rotating crankshaft so that piston comes up to top dead center.
lOmm
socket wrench
~
25Piston and (1) Remove clipsandpistonpin.
Piston rings | (2) Remove piston from connecting rod. |
| (3) Remove piston rings from piston. |
Do not damage the smaller end of connecting
rod.
Do not expand or twist
piston rings.
PISTON RING
,I
PISTON
PISTON PIN
CLIP
CONNECTING ROD
,/-
&N\
c
/
CONNECTING
M6 FLANGE BOLT : 2 PCS.
M7FLANGEBOLT2 PCS.
M8 FLANGE BOLT 2 PCS.
Fig.
- 29 -