MAIN
Fig.
( 2 ) Lubricate the oil seal and bearing surfaces. Add a light film of oil on the main bearing cover face to hold the gasket in place.
Place spacers chosen at procedure(1) on crankshaft and camshaft.
Use an oil seal guide when installing the main bearing covertoavoid damaging the seal. Tap the cover into place witha soft hammer.
Main bearing cover | M6 X 30 mm bolt and washer .... 8 pcs. | ||
M8 X 30 mmboltandwasher | . - e - 8 pcs. | ||
Tighteningtorque | Tighteningtorque | ||
|
|
| |
| |||
|
|
| |
- 37 -
