54 - 17 AIR CLEANER
Install the air cleaner gasket and the cleaner case and tighten them with
Install the head cover to the cylinder head.
M6 X 12mm flange bolt . . a - 1PC.
54 - 19 MUFFLER, MUFFLER COVER and EXHAUST PIPE COVER
Install the muffler to the cylinder head.
M 8 flange nut .... 2 pcs.
Then tighten the muffler bracket portion.
M6 X 12mm flange bolt - | 1PC. |
M 8 X 16mmflangebolt | 1PC. |
Install the muffler cover and exhaust pipe cover.
M 6 X 10mm flange bolt
54 - 20 BLOWER HOUSING, RECOIL
Install the blower housing and the recoil. Insert the high tension cord from the ignition coil into the notc :h of the blower housing so that not to pintch the cord.
Install the fuel tank. Connect the fuel strainer and the fuel inleton carburetor with the fuel hose. M 6 X 14mm bolt and washer
M 8 X 20mmboltandwasher 4 pcs.
- End of the reassembly -
c
- 42 -