Subaru Robin Power Products EH12-2, EH17-2, EH25-2 manual

’	(3) Connect the speed control lever and the governor lever with the governor spring. The governor spring
	should be hooked to the number 2 hole on the speed control lever for the regular specifications.
	Refer to the illustrations below. (SeeFig. 5-42.)
	(4) Turn the speed control lever all the way toward the high speed position and make sure that the throttle
	valve in the carburetor is at the wide open position.
	( 5 ) Turn the governor shaft clockwise all the way using a screw driver, and tighten the lock bolt and nut.
	(See Fig. 5-43.)
	For the generator applications, there are two different governor springs existing according to the speed
	setting of the engine. The governor springs may be distinguishedby the following table.
	The governorspringemployedonthe		6OHz applicationis sameastheonefromthestandardspecifi-
	cations.
	rI	SPEED CONTROL LEVER

GOVERNOR SPRING

\\‘l)t--”GOVERNOR LEVER

Fig. 5-43

N ; SPRING WOUND

EH 12-2EHl7-2EH25-2

	50Hz	60Hz	50HZ	60Hz	50HZ	60Hz
e	(3000rprn)	(3600rpm)	(3000rprn)	(3600 rpm)	(3000rpm)	(3600rpm)
	49 (1.9’7	t	38 (1.5‘7	t	43 (1-73	t

D(0.35”) 8.1 (0.32”) 910.1.7 (0.42”) 9.6(0.38”) 8.7(0.34”) t

I		~	~~~
	Color	Gold Silver SilverGold	Gold	Silver

- 41 -