Order | It em | Procedures |
I
9Starting pulley (1) Remove the starting pulley from the fly - wheel.
144 nut: 1 pce.
Fit a box or socket wrench over the fly- wheel nut, and strike it hard with a ham- mer to remove the 14 mm nut and spring washer.
Remarks
Be careful to damage the blades of the fly- wheel with a driver and the like.
Strike counterclock- wise with a hammer. (See Fig. 16.)
Tool
19 mm box spanner or socket wrench
1 0 , Flywheel | (1) Remove the flywheel from the crankshaft. |
Fit the flywheelpull- er as per Fig. 17, turn the center bolt clock- wise and pull out the flywheel.
Fig. 16
Order Item
11
ignition plug; and remove the ignition coil from the crankcase.
12 19 mmIgnitionbox spannerplug (1) Remove the ignition plug from the cyl- inder head.
13Cylinder head (1) Remove the 8 mm bolt and remove the cylinder head from the crankcase. 8@x 40 mm bolt: 8 pcs.
(2)Remove the cylinder head gasket from the crnkcase.
I | 0 'Flywheel |
Flywheel Puller |
Fig. 17
Remarks Procedures Tool
10 mmbox spanner Sems b
- 1 5 -
