Subaru Robin Power Products EY15V manual Order Exhaust valve Main bearing cover Procedures Remarks

Order

exhaust valve

15Main bearing cover

1

	Procedures	Remarks	Tool
( 1 )	Remove the inner and outer tappet covers	Put the notch on the	10 mm box spanner
	from the crankcase.	outer circumference	r -
	64 x 12 mm bolt: 2 pcs.	of the spring retainer
(2) Pull out the intake and exhaust valves.		on this side.
(3) Remove the valve spring and the valve		Hook the medium
	retainer.,	size (-)driver at the
		dent (lower side) of
		the spring retainer
		and pull out the	The front is this side,
		valves, while pulling
		the spring retainer
		toward you.	:-)driver
		(See Fi. 18.)
( 1 )	From the crankcase remove the bolt	Sems bolt	10 mm box spanner
	fastening the main bearing cover.
(2)	6@x 3 0 m m bolt: 8 pcs.
	Remve the cover, lightly tapping the	Be careful not to dam.
	cover evenly with a plastic hammer.	age the oil seal.
		(SeeFig. 19.)

Plastic Hammer

Fig. 18 Fig. 19

- 16 -