Cateye EC-3600, EC-3700 service manual 2Removing the Frame Covers

			Applicable Models:	EC-3600	EC-3700
D-2	Removing the Frame Covers	No. 15 Wrench
Recumbent Type (EC-3600 & EC-3700)
When any repair or adjustment of parts within the frame is required,				Leg Pipe
remove the frame covers in the following procedures.
				Fixing Screw
àREMOVAL
1. Remove the pedals at both the left and right sides. (The right		Crank		Front Leg with
side pedal can be removed by turning it in the clockwise		Pedal
			Crank Cover	Casters
direction, and the left side pedal can be removed in the
counter-clockwise direction.) (Fig. 1)
2. Remove the crank cover fixing screws. The narrow-width area				Fig. 3
of the crank cover should be positioned in between the frame		Fig. 1
cover and the crank. (Fig. 2)

3.	Remove the leg pipe fixing screws. (Fig. 3)	Frame Cover	Center Cover
	* You do not have to remove the leg pipe itself.
4.	Remove the frame cover fixing screw with a screwdriver before		Fig. 2
	removing the frame cover. (Fig. 4)
àASSEMBLING
1.	Place the frame covers onto the frame at both right and left
	sides, paying attention to the position of the crank. At the		Screw
	same time, the center cover should be built in.

2. Fix the right and left frame covers with frame cover fixing screws.

3. Pass the crank through the hole on the crank cover, and fix the crank cover onto the frame cover with screws. (Fig. 2)

4. Fix the front leg with casters with the leg pipe fixing screws.

5. Mount the pedals.

Fig. 4

Cateye Ergociser Series 1000 Service Manual

D-2Removing the Frame Covers

23