Applicable Models:
EC-3600 EC-3700
MS-13 Replacing the Vertical Pipe Spacer
MS-13 Replacing the Vertical Pipe Spacer
1.Remove the seat hite lock knob, and pull out the rear support pipe.(Fig. 1)
2.Remove the rear support pipe spacer at the rear support pipe insertion area on the top surface of the seat pipe. The rear support pipe spacer is fixed on the pipe with an adhesive tape.
3.Apply and set a brandnew rear support pipe spacer with an adhesive tape.(Fig. 2)
4.Insert the rear support pipe, and fix it with the seat hite lock knob.
Seat Hite Lock Knob |
Rear Support Pipe |
Fig.1 |
Rear Support Pipe |
Insertion Area |
Rear Support Pipe Spacer |
Fig.2 |
Cateye Ergociser Series 1000 Service Manual
50
