Applicable Models:
MS-21 Replacing the Handlebar Grip
1.In case the handlebar grip is damaged, cut the grip with a thin cutting knife and peel it off the handlebar.(Fig. 1)
2.Fit a brandnew handlebar grip onto the handlebar, utilizing compressed air from a compressor, etc. Press the grip into the handlebar while applying compressed air at one end.(Fig. 2)
*When a compressor is not available, apply a soap water on the handlebar, and insert the grip while twisting and pressing the grip.
*When the above replacing work is difficult to achieve, remove the handlebar before the work.
Existing Grip(Old)
Fig.1
Brandnew Grip
Air Gun,etc
Handlebar
Fig.2
Cateye Ergociser Series 1000 Service Manual
58
