T-5No Loading (Check of Mechanical Systems)

 

 

Applicable Models: EC-1200 EC-1600 EC-3600

EC-3700

T-5

No Loading (Check of mechanical systems)

 

 

 

Check Method of Causes

Repair Method

Explanation Figures

[1] Checking the Mechanical Systems

 

 

See the Section D1 & D2 "Removing the Frame Covers" to remove

 

Chain

 

 

the frame cover, and check the inside of frame.

 

 

1.

Check if the chain has not been broken. (Fig. 1)

Replace the chain with a brand new one. (See the

 

 

 

Section MS-4 "Replacing the Chain.")

 

2.

Rotate the crank and check if the belt of the workload unit will

Replace the free wheel with a brand new one. (See

 

rotate. (Fig. 2)

the Section MS-5 "Replacing the Free Wheel Set.")

3.

Check if the free wheel set is not idling. (Fig. 2)

Spray CRC into the gap as shown in Fig. 2, and rotate

 

 

 

the pedal in forward and backward directions.

 

4.

Check if the belt (timing belt) of the workload unit has not been

Replace the workload unit. (See the Sections MS-1 &

 

broken. (Fig. 2)

MS-2 "Replacing the Workload Unit.")

 

5.

Check if the plastic pulley of the workload unit has not been

Replace the workload unit. (See the Sections MS-1 &

 

broken. (Fig. 2)

MS-2 "Replacing the Workload Unit.")

 

Free Wheel

Derailleur

Crank

 

 

Fig. 1

Gap

Timing Belt

Free Wheel

Plastic Pulley

Fig. 2

Cateye Ergociser Series 1000 Service Manual

16

Page 18
Image 18
Cateye EC-3700, EC-3600 service manual No Loading Check of mechanical systems, Check Method of Causes Repair Method