Applicable Models:
MS-11 Adjusting the Spacer Spring
MS-11 Adjusting the Spacer Spring
1.Remove the center cover, by referring to the Section
2.Slightly loosen the lock nut at the side of the frame. (Fig. 1)
3.Fasten the adjust screw so that the seat post (handleber post) will drop slowly.
4.Fasten the lock nut to fix the adjust screw.
5.Assemble the center cover, by referring to the Section
Lock Nut
Adjust Screw
Fig. 1
Cateye Ergociser Series 1000 Service Manual
48