Applicable Models:
EC-3600 EC-3700
MS-12 Replacing the Inner Pipe Spacer
àREMOVAL
1.Slide the seat pipe to the utmost back end, and set it at a posi- tion where the screw head can bee seen through the hole on the top surface of the seat pipe.
2.Remove the stopper screw. (Fig. 1)
3.Pull out the seat pipe and the inner pipe spacer A, while depressing the two bosses, located at the right and left sides of the seat pipe, at the same time. (Fig. 2)
4.Remove the spacer B at the end of the inner pipe. (Fig. 3)
àASSEMBLING
Stopper Screw
Inner Pipe
Seat Pipe
Fig. 1
Inner Pipe Spacer A |
Pull out. |
Inner Pipe |
Boss |
Fig. 2
1.Set a brandnew inner pipe spacer B into the seat pipe. (Fig. 4)
2.Insert the inner pipe spacer A and B together into the seat pipe.
3.Align the hole on the top surface of the seat pipe with the screw hole, and apply the stopper screw. (Fig. 1)
Inner Pipe Spacer B |
Inner Pipe |
Fig. 3
Inner Pipe Spacer A |
Inner Pipe Spacer B |
Insert. |
Seat Pipe |
Inner Pipe |
Fig. 4
MS-12 Replacing the Inner Pipe Spacer
Cateye Ergociser Series 1000 Service Manual
49
