5-4-21 Case body, control panel
Attach the case body (left and right). Install the bottom part of the case body and the mount together.
M6 x 18mm Flange bolt : 4pcs.
Tightening torque :
NOTE: Install the bottom part of the case body correctly.
Attach the upper part of the case body.
M6 x 25 Screw and Washer : 2pcs.
Tightening torque :
NOTE: Avoid gaps in the upper part of the case body when installing.
Install the control panel into the case body.
M4 x 14mm Screw : 4pcs.
M5 x 8mm Screw : 4pcs.
Tightening torque :
5-4-22 Recoil starter and guide
Install the guide of the starter hundle.
Install the guide and starter hundle after they are pushed through the mounting hole from inside of the case body.
M4 x 10mm Tapping screw : 1pcs.
Insert the overflow pipe through the hole in the bottom of the case body.
Case body
Mount
Case body
Control panel
Recoil starter hundle
Guide
Overflow pipe
– 34 –