5-4-11 Base Inverter
Install the base inverter into the engine main body. M8 x 20 Bolt and washer : 4pcs.
Tightening torque :
M6 Flange nut : 4pcs.
Tightening torque : | N・m |
| kgf・cm |
| ft・lbs) |
|
|
NOTE: Avoid cutting your hand by the sharp edge of
the base.
5-4-12 Front frame
Install the front frame (L) and (R) onto the base inverter.
5-4-13 Air cleaner bottom plate and carburetor
Install the insulator,gaskets, carburetor, baffle stay, and air cleaner base plate into the cylinder head.
M6 Flange nut : 2pcs.
Tightening torque :
(5.2-6.6 ft・lbs)
NOTE: Please do not forget to install the gasket.
5-4-14 Air cleaner
Install the element and air cleaner cover onto the air cleaner base plate.
M6 x 18mm Flange bolt : 1pce.
Base inverter
Front frame
Carburetor
Air cleaner base plate
Air cleaner
– 31 –