Subaru Robin Power Products R1700i service manual Assembly procedure, 38

Caution:

Please wear protective goggles before starting assembly.

2) Assembly procedure

(1) Assemble the reel into the case.

-1 Install the ratchet, and fasten it with retaining ring E.

-2 Install the spiral spring in the reel. -3 Apply grease to the case.

-4 Properly orient the inner end of the spring installed in the reel.

-5 Hold the reel so that the shaft and hook part can be caught on the inner end of the spring, and softly drop into the case from the top.

-6 Move the reel gently in the counter-clockwise direction, making sure that the spring catches.

(2) Install the small parts.

-1 Install the ratchet guide and return spring into the reel.

Ratchet

Reel

Retaining-ring E

Spiral spring

Case

Grease

Ratchet guide Return spring

(3)Installing friction plate, retaining ring C

-1 Install by putting the friction spring end into the spring part of the ratchet guide.

Align the cut of the friction plate to the cut of the recoil starter main body, and fasten with the retaining ring C.

Be sure that the retaining ring is fitted into the grooves.

Friction plate

Retaining ring C

Friction spring

– 38 –